Injection molding is how we make individual plastic parts in exact shapes. We heat plastic pellets until they melt. Then we push the melted plastic into a metal mold under high pressure. The plastic cools and takes the exact shape of the mold. When the mold opens, out comes your finished part — ready to use.
Every part is identical to the last one. This makes injection molding perfect for making hundreds, thousands, or millions of the same part.
We design and make our molds in our own factory. This means faster delivery and lower cost compared to manufacturers who outsource their tooling.
Gears, bushings, brackets, housings, clips, fasteners, and machine parts for industrial equipment.
Condenser fin strips, air duct seals, grille frames, and moulded housings for HVAC manufacturers.
Learn more →Switch housings, connector bodies, panel covers, junction boxes, and electrical insulation components.
Learn more →Interior trim pieces, clips, brackets, vent covers, button panels, and custom auto components.
Learn more →Product housings, caps, lids, containers, handles, and parts for consumer goods manufacturing.
Medical-grade plastic parts, lab components, pharmaceutical containers, and clean-room suitable parts.
Food-safe plastic containers, crates, utensils, and packaging components made from approved materials.
Pipe fittings, plugs, anchors, corner brackets, and custom building hardware.
Learn more →Custom OEM components made to your exact drawings, under NDA, with your branding if required.
Learn more →Send us a 3D CAD file (STEP, IGES, SolidWorks), 2D drawing, or a sample part. We review it for free.
Our engineers check your design for manufacturability. We suggest changes if needed, then send you a mold cost and per-piece price.
We design and machine your mold in-house. Steel or aluminum. Single cavity or multi-cavity. Usually 3 to 8 weeks.
We run the mold and produce first-article samples. We measure and inspect every dimension and send you samples to check.
You check the samples and confirm they are correct. We make changes if needed. No bulk production until you give the go-ahead.
We run full production with in-process quality checks. Parts are counted, inspected, and packed. Then delivered to you.
We design and machine every mold ourselves. No delays from outsourcing. You get faster samples and lower tooling cost.
Our engineers review your design and suggest improvements before we start making the mold. This saves time and money.
We keep MOQ as low as possible. Small batches are welcome, especially for new products or test runs.
We make parts under your brand name. We sign non-disclosure agreements to protect your product designs.
Every part is inspected. We measure dimensions, check appearance, and verify material. You get what you ordered, every time.
Third-generation family business since 1978, making injection moulded parts. We have solved thousands of manufacturing challenges. We will solve yours too.
Injection moulding is a process where we heat plastic pellets until they melt, then inject the melted plastic into a metal mould under high pressure. The plastic cools and hardens inside the mould, and when we open the mould, out comes the finished part. We can make thousands of identical parts this way.
Mould cost depends on the size and complexity of the part. A simple mould can cost from PKR 50,000 to PKR 500,000. A large or complex mould can cost more. The mould is a one-time cost. Once it is made, each part costs much less to produce. Contact us for a specific quote.
MOQ for injection moulding depends on the part and the mould cost. We try to keep MOQ as low as possible. For simple parts with small moulds, MOQ can be as low as 500 to 1,000 pieces. For complex parts, MOQ may be higher to make the mould cost worthwhile.
Yes. We can do insert moulding where we place a metal insert (like a screw thread) into the mould before injecting plastic. The plastic moulds around the insert, making a combined plastic-metal part. We can also do overmoulding for two-material parts.
ABS, PP, PC, Nylon — which plastic works best for your injection moulded part?
→ Material Selection GuideAnswer 5 questions to find the right material for your application and budget
→ Quality ControlHow we inspect every moulded part — dimensions, material, and surface quality
→ Manufacturing ProcessSee our full process from your drawing to delivered parts in 6 clear steps
→ Product GalleryBrowse examples of injection moulded and extruded parts we have already made
→ Profile ExtrusionNeed a long continuous plastic shape instead of individual parts? We extrude too
→Send us your design or a sample. We will review it for free and give you a quote within 1 business day.