Sliding Door Profiles for Freezers and Refrigerators
Virgin PVC sliding glass door track for deep freezers and commercial freezers, made in Lahore
PlasCity manufactures freezer sliding door profiles in Ferozewala, Lahore. A freezer sliding door profile is the extruded track that holds the glass or panel of a sliding door and guides it along the cabinet. We make ours in virgin PVC, to fit your door and glass, and sell them by the metre for deep freezers, chest freezers, display freezers and commercial refrigeration cabinets.
What is a sliding door profile for a freezer?
A sliding door freezer has no hinges. The glass or panel moves along a track, and that track is an extruded plastic profile. It decides how smoothly the door moves, how firmly the glass sits and how straight the door stays over years of daily use. A small error in the groove shows up as a door that sticks, rattles or slips out of line. Buyers also call this part a glass channel, sliding track or door channel.
Freezer sliding door profile price per metre in Pakistan
Our freezer sliding door profiles are currently priced from PKR 13 to 17 per metre. The rate depends on the track shape, groove size, single or double track layout and the length you order. A price cannot be set from a photo, because die size, die cost and final product cost come from the actual shape. Send a sample or CAD file and we will quote within one business day.
Specifications
| Specification | Detail |
|---|---|
| Product | Sliding door track profiles for refrigerators, deep freezers and commercial freezers |
| Job | Holds, guides and aligns a sliding glass or panel door |
| Material | Virgin PVC |
| Made to | Your glass or panel thickness and cabinet design |
| Price | PKR 13 to 17 per metre |
| Supply | By the metre, cut to the length you need |
| Customization | Track shape, groove size, length, colour, formulation, rigid or soft sections |
| Start from | A sample, drawing or CAD file |
| Made by | PlasCity, Ferozewala, Lahore, Pakistan |
What it is used for
- Guiding the door so it slides smoothly and settles in place
- Holding the glass or panel edge without play
- Keeping the door aligned along its full length
- Giving the cabinet opening a clean, finished edge
Where it is used
- Deep freezers and chest freezers
- Ice cream and frozen food display freezers
- Supermarket island freezers and display coolers
- Commercial refrigeration cabinets with sliding glass doors
- Freezer and refrigerator manufacturers building sliding door models
Why this profile is preferred
Virgin PVC, because the door moves every day. A sliding track carries friction on every opening. Plastic that has been recycled several times loses strength and shape, and it cracks, warps or wears unevenly under that load. Virgin material keeps the groove accurate for longer, which is why a sliding profile made from it can cost more than a cheap one made from reprocessed plastic. See how to spot recycled plastic before it wrecks your product.
A groove cut for your glass. The die is designed around your glass or panel thickness, so the door sits snug without forcing and slides without rattling.
Smooth surface for smooth sliding. The track surface is checked for roughness, flow marks and die lines, since those are the first things that make a door drag.
Straight lengths, even colour. Pieces are straight, consistent in weight and uniform in colour, so the cabinet looks tidy and the door runs evenly from one end to the other.
What to check before choosing a sliding door profile manufacturer
- Does the groove match your glass or panel thickness with no gap and no forcing?
- Does the door slide evenly along the whole length, not only in one spot?
- Is the surface smooth, with no black specks, dull patches or rough areas?
- Does a short offcut bend without cracking or turning brittle?
- Are the lengths straight and the weights consistent between pieces?
- Has the profile been tested with your actual glass or door before you order more?
A profile can match the drawing and still fail on the cabinet, so test it with the real door.
Customization
- Track shape and cross section to match your cabinet
- Groove size for your glass or panel thickness
- Single track or double track layouts
- Rigid, soft or twin material sections, for example a rigid body with a soft gripping lip
- Length in metres, feet or inches
- Colour and shade
- Formulation matched to your operating conditions
- Surface finish
- Revisions to the die until the sample fits and you approve it
- A copy of your existing profile, made from a sample or CAD file
Send a physical sample, a CAD file or a technical drawing. A photo alone is not enough, because the die size, die cost and product cost depend on the exact shape.
How to order
- Send a sample, drawing or CAD file, plus your glass or panel thickness.
- Add the length per piece and the quantity you need.
- We reply with a price within one business day.
- Once you approve the sample, we manufacture your order.
Need other refrigeration profiles?
This page covers the sliding door track only. For finishing edges on glass doors, see our glass and grill trims for refrigeration. For sealing around a door, see our refrigeration gaskets in rubber, flexible PVC and EPDM.
Frequently asked questions
What does a sliding door profile do in a deep freezer?
It forms the track that holds the sliding glass and guides it, keeping it aligned and smooth to move.
What is the price of a freezer sliding door profile in Pakistan?
Our profiles are currently PKR 13 to 17 per metre, depending on the track shape, groove size, layout and length. Send a sample or CAD file for an exact quote.
Is a sliding door profile the same as a glass channel or track?
Yes. Buyers use glass channel, sliding track and sliding door profile for the same part, the extruded track the glass door runs in.
Can you match the profile to my existing freezer?
Yes. Send a sample or a CAD file and the profile is made to match it.
Why does virgin PVC matter for a sliding track?
The track takes friction every time the door opens. Virgin material holds its shape and strength, while heavily recycled plastic tends to crack, warp or wear unevenly.
Can I get a price from a photo?
No. A price needs a sample or CAD design, because die size, die cost and final product cost come from the actual shape.
Do you supply sliding door profiles in bulk to freezer manufacturers?
Yes. Tell us the length per piece and the quantity, and we will quote for a single order or a repeat run.
Do you manufacture sliding door profiles in Lahore?
Yes. PlasCity makes them at our factory in Ferozewala, Lahore.
What should I send to start?
A sample, a drawing or a CAD file, plus the glass or panel thickness and the length and quantity you need.
