PlasCity manufactures U profiles for furniture in bulk in Ferozewala, Lahore. They are U shaped plastic channels that slide over a flat panel edge to edge, trim and finish it, giving furniture pieces a clean, protected finish. Made to your panel thickness, in custom sizes and colours, and sold by the metre.
What is a U profile?
It is a U shaped channel profile that slides over a flat panel edge, covering the raw board surface completely. It protects the edge from chipping and moisture while giving furniture a smooth, finished look without needing paint or laminate wrapping on that edge.
Furniture U profile price per metre in Pakistan
Our furniture U profiles are currently priced from PKR 14 to 32 per metre. The rate depends on the channel size, the panel thickness it fits, the colour and the length you order. Send a sample or drawing with your board thickness and we will quote.
Where U profiles are used on furniture
- Cabinet doors and shutter edges
- Shelving panels in wardrobes, cupboards and display units
- Tabletop and countertop edges
- Drawer fronts and side panels
- Wardrobe and cupboard door frames
- Display cases and retail furniture fixtures
What to check before choosing a U profile manufacturer
- Snug channel grip that holds firmly on the panel without sliding off over time
- Consistent channel depth so it fits the exact board thickness evenly along the full edge
- Smooth, presentable finish since the edge stays visible on the finished furniture piece
- No cracking or splitting when fitted onto sharp panel corners
- Colour match consistency across a full production batch for uniform furniture sets
- A manufacturer able to match the channel width to your specific board or panel thickness
Applications
Furniture edge trim, panel finishing, cabinet edging and OEM furniture assembly.
Customization
Available in custom sizes, profile designs, colours and materials to fit different panel thicknesses and furniture designs, with bulk production for furniture makers and OEM assemblers.
Why buyers choose PlasCity for U profiles
U profiles built to precise channel depths for a firm, snap fit finish, matched to any furniture panel thickness on request.
What to send for a quote
A sample or drawing of the profile, or the thickness of your board or panel. Add the colour, the length and your quantity.
Joining two panels?
This page covers a profile that finishes a single panel edge. To connect two flat panels at a seam, see our H shape inner join.
Frequently asked questions
What is a U profile used for in furniture?
It is fitted over panel edges to protect and finish them, giving furniture a clean, uniform edge.
What is the price of a furniture U profile in Pakistan?
Our furniture U profiles are currently PKR 14 to 32 per metre, depending on channel size, panel thickness, colour and length. Send a sample or drawing for an exact quote.
Can PlasCity match a specific panel thickness?
Yes. U profiles are custom sized to fit different panel and board thicknesses.
Is a U profile the same as edge banding?
No. Edge banding is a thin strip applied to a panel edge. A U profile is a channel that slides over the edge and grips it, covering the raw board completely.
Where on a piece of furniture is a U profile typically fitted?
Commonly on cabinet doors, shelving edges, tabletops, drawer fronts and wardrobe frames, wherever a raw board edge needs covering.
Can I order furniture U profiles in bulk in custom colours?
Yes. PlasCity manufactures U profiles in bulk, in your size and colour. Send a sample or drawing with the length and quantity for a quote.
Do you manufacture furniture U profiles in Lahore?
Yes. PlasCity makes them at our factory in Ferozewala, Lahore.